Shadow box coffee table is a unique way to add personality to a room. Set the fence in the table looked at 1 3/4 inch. Set the height of the blade 1/4 inch. Make a pass of four pieces of MDF that is 2 inches wide. The groove should be at least 1/4 inch wide for glass. Place the table top material on the table. Mark on the outer edge of the table 3/8 inch and 1 inch from the edge and every 8 inches around the perimeter. Drill lower the holes on these marks.
Place all of the 3 1/2-inch material on the table. Drill two lowers the holes on both ends of longer pieces. Apply glue to the ends of the short pieces, lay them between the longer ones and secure them with or screws. Glue on the inside of the line at the outer edge of the bottom of the shadow box coffee table design, as it strikes the marks and glue and attach the table with it or screws.
12 Photos Gallery of: DIY Shadow Box Coffee Table
Build three sides of the frame with pieces from step 1 through glue to the ends of a short paragraph and place it between the two longer pieces. Secure these together with or screws. Determine a pattern you want to use and cut a 3/4 by 3/4 inch divider material at the desired length with the electric saw. Drill holes in them and secure DIY shadow box coffee table to the top with glue and 3D nails finish.