Almost anyone can replace the existing ceiling fixtures with an IKEA pendant light style. The installation process takes less than an hour and does not require special skills or experience. Turn off the power in the room you are going to work. Move the switch to the off position and verify that the power is off and the armor. Place your tools and the new pendant light in a small bucket on the shelf of the painting of the staircase.
Before installing IKEA pendant light, remove the two screws on each side of your existing fixture in the ceiling, expose the electrical box and wiring. Disconnect the cables and remove the device. Turn the exposed end of the black wire to the matching black wire of the electrical box. Screw a threaded nut from the play of lights where the ends are fused and wrapped with electrical tape to protect the connection from corrosion. Repeat this process with the white wires.
13 Photos Gallery of: IKEA Pendant Light As Ceiling Light
Screw the pendant lamp mounting plate into the two holes on both sides of the box. Place the faceplate on the electrical panel and the mounting plate. Release the pendant to hang its full length and its final height. Fix the shade on the IKEA pendant light socket with the included screws. Install the bulb. Reconnect to the room by turning the switch to the “on” position and check the light.